Talent Series Routers
Fuse Series Edgebanders
The NewCNC Fuse 6 is a heavy-duty Edgebander designed for a continuous duty cycle. This is not a low-end entry-level machine but does have a very attractive price. The first station applies glue to the edge of the panel and moves into a 4-roller pressure section. Station 2 is a double motor end trim. Double motors allow much faster feed speeds and is more desirable than a single motor end trim machine. Station 3 is a top and bottom rough trim station. Station 4 is top and bottom radius fine trim, station 5 is top and bottom radius scraping, and station 6 is top and bottom buffing. Machines can also be configured front and rear mist stations. The result is a finished edge right off the machine with no need for additional processing. Like the rest of the NewCNC line of Edgebanders, the Fuse 6 uses straight forward mechanical design making adjustment simple. Use with PVC, ABS, acrylic, melamine, or wood veneer. Processing speeds up to 70 feet per minute are achievable. Other machines comparable in price typically run maximum speeds of 21 feet per minute. Additional features are available on the other Fuse models see below for details.