Diager 4013S One-Flute Upcut with Flat Tip
CUTTER DERIVED FROM THE 4013 WITH FLAT TIP FOR FINISH.
Imporves the surface finish at the bottom of the pocket. Smooth and polished flute, limited build-up on edges. Upcut tool with upwards removal of chip. Efficient chip evacuation.
WHEN POSSIBLE, SELECT SHORT CUTTERS
(CUTTING LENGTH = 2 X Ø):
- Improves surface finishes,
- Longer service life of the tool,
- Improves cutting conditions.
Tool Features
Recommended Materials
Possible Materials
Technical Drawing
