1/2" 2 flt with 1/4" Upcut Compression (1.00" L.O.C.)

Perfect edge finish on both sides.

1/2" 2 flt with 3/8" Upcut Compression (2" L.O.C.)

Perfect edge finish on both sides.

1/2" x 1" 2 Flute Downcut Finisher

These two flute finishers are the perfect tool for getting a clean profile finish without the top chipping or peeling. These precisley ground finisher bits have a clean sharp edge to provide...

1/2" x 1" 3 Flute Downcut Finisher

1/4" 2 flt with 1/4" Upcut Compression (1" L.O.C)

Perfect edge finish on both sides.

1/4" x 1" 2 Flute Downcut Finisher

10mm Cut Length, 6mm Round Shank, Single Edge Round Point Oscillating Knife Blade 36mm OAL

Round pointed knife blade for the cutting of soft and packaging materials. Direct replacement for BT-57267, .7267, and K4. Compatible with most Knife Tool Machines that take 6mm Round Shank...

11.3mm Cut Length, 4.4mm Flat Shank, .63mm Thick, Single Edge Oscillating Knife Blade, 25mm OAL

Singel Edge Oscillating Knife Blade with small pre cut and flat tip. Direct replacement for Z41, and XZ0041. Material Usage: Leather Foam Felt Textiles Wooven materials Corrugated Cardboard

110 mm Cut Length, 6mm Round Shank, Single Edge Flat Point Oscillating Knife Blade 131mm OAL

Flat pointed knife blade for the cutting of insulation and fibrous materials. Direct rplacement for BT-572110,XK3110-OFP. Compatible with most Knife Tool Machines that take 6mm Round Shank...

110 mm Cut Length, 6mm Round Shank, Single Edge Round Point Oscillating Knife Blade 131mm OAL

Round pointed knife blade for the cutting of insulation and fibrous materials. Direct rplacement for BT-572110. Compatible with most Knife Tool Machines that take 6mm Round Shank.  Material...

12.5mm Cut Length, 13mm Flat Shank, .63mm Thick, Double Edge Mat-Cutting Blade 26mm OAL

Double Edge Mat-Cutting Knife Blade for cutting straight lines and sharp corners. Direct replacement for Z35 and XZ0035. Material Usage: Matboard 

12mm Cut Length, 5.65mm Flat Shank, .63mm Thick, Single Edge Oscillating Drag Knife Blade 25mm OAL

Single Edge oscillating drag knife blade used for cutting thin materials. Direct replacement for Z17,BLD-SF217, and XZ0017.  Material Usage: Paper 100-400g Folding Carton 100-1500g Coating...