Round Shank Oscillating Knife Blades

Oscillating knife blades with a 6 mm round shank, for the oscillating tools on MultiCam, AXYZ, Aristo, Esko Kongsberg, Summa and Ecocam cutting tables. Single and double edge, 6 mm to 120 mm cut length, all solid tungsten carbide. For Zund-pattern flat blades, see Flat Shank Oscillating Knife Blades.

Find a blade by tip and cut length

Double edge blades: C6265, CK114, CO25416, CO40566DE, CO60766DE.

What they cut

• 15 mm or less: corrugated board, folding carton, gasket and rubber.
• 16 to 60 mm: foam board, corrugated plastic, honeycomb, carpet, rubber and triple wall corrugated.
• Over 60 mm: foam, insulation and fibrous materials. CSR6831 cuts foam up to 80 mm thick.
• Serrated CSR6352 and CW38: honeycomb, tough paper materials and foam. The serrated edge cuts with less friction, so the blade stays cooler.

Holders

Each blade's page lists the tools it fits. The full table is on Round Shank Knife Blades.

• MultiCam Oscillate or KH6 (each blade's page says which): C30516RP, CK114, CO25416, CO40566DE, CO60766DE, CSR6303 and every C5, C6 and C7 blade except C572110RP.
• AXYZ Oscillating: every C5, C6 and C7 blade, and CO40566DE.
• Aristo 7553: C30516RP, C7265, C7267, C7268 and C7275.
• Esko Kongsberg Reciprocating/MP HF, Long Stroke and VibraCut knife tools: CSR6223, CSR6224, CSR6303, CSR6310 and CSR6375.
• Esko Kongsberg FoamHead: CSR6352 and CSR6831.
• Summa 500-9350: C57269RP.
• Ecocam EOT: every blade here except C72120.

Ecocam

CE12, CE18 and CE25 replace Ecocam's universal blades E12, E18 and E25 and fit both the EOT and the TCM. CW38 replaces Ecocam W38 and fits the EOT. CE12 and CE18 are on Round Shank Drag & Tangential Knife Blades. All Ecocam-numbered blades are on Ecocam-Compatible Knife Blades.

Brand names are trademarks of their owners, used here only to show compatibility.